Oh man! was it easy to do? I want to do that to mine but didn't know if it was easy and not a huge hassle! please tell me all about it!
It's not very difficult at all -- the instructions are detailed and they include a DVD of a couple demonstrating the process. It takes 2 consecutive days to do. You first sand your countertops with the sanding block, lay on a thick coat of the adhesive base coat, spray on an additional adhesive spray and then immediately spread the decorative chips using this spreader that comes in the kit. Then let it all dry at least 12 hours but not more than 24 hours. The next day, vacuum up the loose chips on the counter and start sanding down the rest of the chips. This part takes the longest (I spent maybe 3 hours sanding and vacuuming/brushing off the chip dust) as you want it to be as smooth as possible. Then you wipe down the counter until no more chip dust is on it and apply the glossy top coat. Let dry for 2 days before light use (after 2 days you can put things back on the counter weighing no more than 5 lbs). It's fully usable after a week.
The only things I had to buy were 2 2" paint brushes, a 6" roller, a 6" foam pad for the roller, a 6" microfiber pad for the roller and 2 6" plastic paint trays. Everything else is in the kit. A Shop Vac with the brush attachment makes the cleanup a lot easier too.
