It is adrop in pump. Probably wrong term but its in the well itself. I have the breaker off eight now. Don't want to burn it out.
I have a water treatment system. It consists of two small tanks with timers, a large center tank, salt box and clorine tank. I'm in WV, we have high sulfur water. With the breaker on, the small timer, motor on the tanks run, the well pump is running, by ear only. The saly box fills with water, and overflows. The small metering motor for mixing the clorine, etc is also running. Where the well water comes up by pipe, there is a small pressure switch with a gauge, next to the water tank, 0 pressure reads there. This is before it enters the treatment system, hence my belief that the problem must be between there and the pump. The water in the salt tank, my guess, is only water already in the system. I can try to drain water at the bottom of the large storage tank and get nothing.