I'm just posting this in case there are any geeks that might find this interesting.
My cousin gave this thing to me so that I might get my head back into the right frame of mind.
Awhile back I took a fall and busted my head open, took awhile to gather my thoughts and now I'm trying to get my feet wet again.
This thing is so crazy he figured I'd get lost in it and get technical again. Anyway, I have trouble referring to this thing as a switch, it's more like a router with a built in gigabit switch.
It's got 12 switch ports and 4 gbic slots.
Ok, this is most of the running config, it's mostly factory default but it will give you an idea of what this thing can do.
I'd not even heard of Allied Telesyn until the last day or two. The # symbol comments out the line so it's ignored, it's just a way to help a human to make sense of the config file.
Manager > show config dynamic
# Command Handler configuration
# System configuration
# TIMEZONE configuration
# Flash memory configuration
# LOADER configuration
# User configuration
add user=admin pass= priv= securityOfficer lo=yes
set user=admin telnet=yes netmask=255.255.255.255
set user=manager pass= priv=manager lo=yes
set user=manager telnet=yes desc="Manager Account"
# TTY configuration
# ASYN configuration
# SWITCH (pre-VLAN) configuration
# PPP templates configuration
# L2TP configuration
# Sec Associations configuration
# VLAN general configuration
# STP general configuration
# VLAN port configuration
# IGMP Snooping configuration
# MLD Snooping configuration
# STP port configuration
# CLASSIFIER configuration
# SWITCH (post-VLAN) configuration
# PPP configuration
# DHCP (Pre IP) configuration
# DHCPv6 (pre-IPv6) configuration
# GRE configuration
# IP configuration
enable ip
add ip int=vlan1 ip=192.168.1.1
# IPv6 configuration
# SWITCH (post-IP) configuration
# PIM configuration
# PIM6 configuration
# DVMRP configuration
# OSPF configuration
# CLNS configuration
# SNMP configuration
# INT configuration
# Firewall configuration
# RADIUS configuration
# Telnet configuration
# BOOTP configuration
# NTP configuration
# Ping configuration
# DHCP (Post IP) configuration
# DHCPv6 (post-IPv6) configuration
# IPX configuration
# Appletalk configuration
# ENCO configuration
# SSH configuration
# SSL configuration
# Log configuration
# RSVP configuration
# Mail configuration
# PKI configuration
# HTTP configuration
# SWITCH (post-VLAN) configuration
# VRRP configuration
# GUI configuration
# GARP configuration
# QOS configuration
# BGP configuration
# ALARM configuration
# LB configuration
# TACP configuration
# SKEY configuration
# PORTAUTH configuration
# 802.1X configuration
# GARP configuration
# QOS configuration
# BGP configuration
# ALARM configuration
# LB configuration
# TACP configuration
# SKEY configuration
# PORTAUTH configuration
# 802.1X configuration
# LACP configuration
# LLDP configuration
# TRIGGER Configuration